Compare Products
Compare Cutting Solutions
Cutting Solutions
Automatic Cycle with pre-selection of production batch specs
Batch Quantity
Blade wetting system
Diagnostic and safety systems
Generated minimal tubing discard when prepping machine for cutting operations
In-progress counter of actual number of products produced and preset quantity of products per batch
Innovative Brake/Clutch unit
Maximum Air consumption
Multiple-length cutting modes
PLC controlled machine
Pre-select unit length in millimeters or inches
Production data can be retrieved via USB drive
Programmable Cut Length
Resident Memory
Self-correction encoder system
Tube OD
Tubing can be pre-cut tubing fed by hand
Tubing Line Speed
TECNOcut 1.6
Yes
From 1 to 99,999 pieces
Yes
Yes
Yes
Yes
Yes
300 nl/min (including the Discharge Conveyor)
Yes
Yes
Yes
Yes
from 5 to 10000 mm, (from 0.2 to 393 inch)
Up to 50 different programs in single mode, Up to 20 different programs in multiple mode
Yes
2 to 25mm
No
Programmable, up to 75 m/min
EASYcut
Yes
From 1 to 99,999 pieces
No
Yes
Yes
No
No
N/A
No
No
Yes
No
From 10 to 9999 mm (from 0.2 to 393 inch), with increments of 1 mm or 0.01 inch
Up to 10 different programs
No
From 2.5 mm (0.098“) to 9.9 mm (0.389“)
Yes
Programmable, up to 45 m/min
