Specially designed for UV gluing
The DUV is designed to dispense UV cured adhesive onto the external and internal surfaces of tubings, needles, connectors, and other medical device components. It features a single bushing slot and can accommodate the assembly of components ranging in diameter from 2mm to 10mm. And each tubing diameter requires a unique bushing. The bushings can be easily removed and replaced when needed.
The DUV comes standard with a Vapor Conveyor System (VCS) that removes glue vapors from the working area to achieve minimal environmental contamination. There are two main versions of the DUV: the DUV LS and the DUV Plus.
DUV LS (Level Sensor): It’s features a visual level indicator with marks that show the maximum and minimum glue levels in the reservoir and a LED signaling system that alerts the operator when the glue level is low. The DUV LS dispenses glue on the external surfaces of tubings.
DUV PLus: It’s capable of dispensing UV glue on internal surfaces. It is available by request only.
|Power Supply||220-230V, 50-60Hz 10 VA|
|Working Voltage||18V, 50/60Hz|
|Max viscosity of adhesive||1500 cP|
|Dispensing Bushing (type, min-max)||OD: 3.0/8.0mm – 8.1/12.5mm, |
|Vapor conveyor system aspiration flow||5/10 cubic meters/hour|
|Vapor conveyor system air speed||0.3/0.5 cubic meters/second|
|Glue Tank Capacity||70 ml|
|Glue Level Sensor||Yes|
|Vapor Conveyor System (VCS)||Included in base model|